AQW414EH 128 1 2 3 4 8 7 6 5 photomos relays gu (general use)-e type 2-channel (form b) type mm inch 3.2 .126 6.4 .252 9.86 .388 2.9 .114 6.4 .252 9.86 .388 features 1. reinforced insulation 5,000 v type more than 0.4 mm internal insulation dis- tance between inputs and outputs. con- forms to en41003, en60950 (reinforced insulation). 2. compact 8-pin dip size the device comes in a compact (w)6.4 (l)9.86 (h)3.2 mm (w).252 (l).388 (h).126 inch , 8-pin dip size (through hole terminal type). 3. applicable for 2 form b use as well as two independent 1 form b use 4. controls low-level analog signals photomos relays feature extremely low closed-circuit offset voltage to enable control of low-level analog signals without distortion. 5. high sensitivity, high speed re- sponse. can control a maximum 0.13 a load cur- rent with a 5 ma input current. fast oper- ation speed of 0.8 ms (typical). 6. low-level off state leakage current typical applications ? modem ? telephone equipment ? security equipment ? sensors types *indicate the peak ac and dc values. note: for space reasons, the smd terminal shape indicator "a" and the package type indicator "x" and "z" are omitted from the seal. type i/o isolation voltage output rating* part no. packing quantity through hole terminal surface-mount terminal load voltage load current tube packing style tape and reel packing style tube tape and reel picked from the 1/2/3/4-pin side picked from the 5/6/7/8-pin side ac/dc type reinforced 5,000 v 400 v 100 ma AQW414EH AQW414EHa AQW414EHax AQW414EHaz 1 tube contains 40 pcs. 1 batch contains 400 pcs. 1,000 pcs. rating 1. absolute maximum ratings (ambient temperature: 25 c 77 f ) item symbol AQW414EH (a) remarks input led forward current i f 50ma led reverse voltage v r 3v peak forward current i fp 1a f =100 hz, duty factor = 0.1% power dissipation p in 75mw output load voltage (peak ac) v l 400 v continuous load current i l 0.1 a (0.13 a) peak ac, dc ( ): in case of using only 1 channel. peak load current i peak 0.3 a 100 ms (1 shot), v l = dc power dissipation p out 800mw total power dissipation p t 850mw i/o isolation voltage v iso 5,000 v ac temperature limits operating t opr C40 c to +85 c C40 f to +185 f non-condensing at low temperatures storage t stg C40 c to +100 c C40 f to +212 f testing
AQW414EH 129 2. electrical characteristics (ambient temperature: 25 c 77 f ) note: recommendable led forward current i f = 5 to 10ma. for type of connection, see pa ge 33. *operate/reverse time n for dimensions, see page 27. n for schematic and wiring diagrams, see page 33. n for cautions for use, see page 36. item symbol AQW414EH (a) condition input led operate (off) current typical i foff 1.3ma i l =max. maximum 3.0ma led reverse (on) current minimum i fon 0.4ma i l =max. typical 1.2ma led dropout voltage typical v f 1.14 (1.25 v at i f =50ma) i f =5ma maximum 1.5v output on resistance typical r on 26 w i f =0ma i l =max. within 1 s on time maximum 35 w off state leakage current maximum i leak 10 m a i f =5ma v l =max. transfer charac- teristics turn on time* typical t off 0.8ms i f =0ma ? 5ma i l =max. maximum 3.0ms turn off time* typical t on 0.2ms i f =5ma ? 0ma i l =max. maximum 1.0ms i/o capacitance typical c iso 0.8pf f =1mhz v b =0 maximum 1.5pf initial i/o isolation resistance minimum r iso 1,000m w 500v dc toff input output 10% 90% ton reference data 1. load current vs. ambient temperature char- acteristics allowable ambient temperature: C40 c to +85 c C40 f to +185 f 2. on resistance vs. ambient temperature char- acteristics measured portion: between terminals 5 and 6, 7 and 8; led current: 0 ma; load voltage: max. (dc); continuous load current: max. (dc) 3. operate (off) time vs. ambient temperature characteristics led current: 5 ma; load voltage: max. (dc); continuous load current: max. (dc) 0 200 150 100 50 0204060 ?0 8085 100 ?0 ambient temperature, c load current, ma using only 1 channel using 2 channels 0 10 20 30 40 ?0 50 0 ?0 20 40 60 8085 ambient temperature, c on resistance, 0 1 0.5 1.5 2 2.5 ?0 3 0 ?0 20 40 60 8085 ambient temperature, c operate (off) time, ms
AQW414EH 130 4. reverse (on) time vs. ambient temperature characteristics led current: 5 ma; load voltage: max. (dc); continuous load current: max. (dc) 5. led operate current vs. ambient tempera- ture characteristics load voltage: max. (dc); continuous load current: max. (dc) 6. led turn off current vs. ambient temperature characteristics load voltage: max. (dc); continuous load current: max. (dc) 0 0.2 0.4 0.6 ?0 0.8 0 ?0 20 40 60 8085 ambient temperature, c reverse (on) time, ms 0 1 2 3 4 ?0 5 0 ?0 20 40 60 8085 ambient temperature, c led operate current, ma 0 1 2 3 4 ?0 5 0 ?0 20 40 60 8085 ambient temperature, c led turn off current, ma 7. led dropout voltage vs. ambient tempera- ture characteristics; led current: 5 to 50 ma 8. voltage vs. current characteristics of output at mos portion measured portion: between terminals 5 and 6, 7 and 8; ambient temperature: 25 c 77 f 9. off state leakage current measured portion: between terminals 5 and 6, 7 and 8; ambient temperature: 25 c 77 f 0 ?0 ?0 20 40 60 8085 1.5 1.4 1.3 1.2 1.1 1.0 0 50ma 30ma 20ma 10ma 5ma ambient temperature, c led dropout voltage, v 5 3 ? ? 60 40 20 ?0 ?0 ?0 ?0 ?00 ?20 ?40 ? ? 24 1 ? voltage, v current, ma 140 120 100 80 0 60 100 20 40 80 10 ? 10 ? 10 ? 10 ?2 load voltage, v off state leakage current, a 10. led forward current vs. operate (off) time characteristics measured portion: between terminals 5 and 6, 7 and 8; load voltage: max. (dc); continuous load current: max. (dc); ambient temperature: 25 c 77 f 11. led forward current vs. reverse (on) time characteristics measured portion: between terminals 5 and 6, 7 and 8; load voltage: max. (dc); continuous load current: max. (dc); ambient temperature: 25 c 77 f 12. applied voltage vs. output capacitance characteristics measured portion: between terminals 5 and 6, 7 and 8; frequency: 1 mhz; ambient temperature: 25 c 77 f 0 0.5 1.5 1 2 2.5 3.5 3 10 20 03040 50 60 led forward current, ma operate (off) time, ms 0 0.1 0.2 10 0203040 0.5 50 60 0.4 0.3 led forward current, ma reverse (on) time, ms 0 120 100 80 60 40 20 10 20 30 40 50 60 0 applied voltage, v output capacitance, pf 5/7/2001 all rights reserved, ? copyright matsushita electric works, ltd. go to online catalog
|